Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0281

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
ONE OR MORE REAR
6.
If continuity is not present,
MARKER LIGHTS DO NOT
repair wire (WP 0043 00) or
ILLUMINATE - CONTINUED
replace electrical cable
assembly (WP 0051 00). If
continuity is present, replace
left rear marker light
assembly (WP 0050 00).
7.
Check for continuity through
1.
Remove center rear marker
center rear marker lamp.
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) probe
of digital multimeter to
center of socket side of
lamp.
4.
Connect negative (-) probe
of digital multimeter to side
of socket side of lamp.
5.
Note reading on digital
multimeter.
6.
If continuity is not present,
replace center rear marker
0036 00-11


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.