Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
LEFT FRONT MARKER
6.
If 8-14 vdc is not present,
LIGHT DOES NOT
go to (Test Or Inspection)
ILLUMINATE - CONTINUED
number 7 of this
Malfunction. If 8-14 vdc is
present go to (Test Or
Inspection) number 8 of
this Malfunction.
6.
Check for continuity
1.
Position towing vehicle main
between connector J251 and
light switch to OFF.
terminal lug TL255.
2.
Disconnect connector J251
from left front marker light
connector.
3.
Open voltage converter box
4.
Set digital multimeter to
ohms.
5.
Connect positive (+) probe
of digital multimeter to
connector J251.
6.
Connect negative (-) probe
of digital multimeter to
terminal lug TL255.
7.
Note reading on digital
multimeter.
0036 00-29


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business