ANTI-LOCK BRAKING SYSTEM (ABS) POWER AND DIAGNOSTIC
0073 00
CABLE REPLACEMENT (Vehicles S/N 15,676 and Higher) - Continued
INSTALLATION - Continued
NOTE
The following four steps require the aid of an assistant.
17. Position clamp (16) on clamp (18) with screw (17) and self-locking nut (15).
18. Position ABS power and diagnostic cable (13) and electrical cable assembly (12) in two clamps (11).
19. Install two clamps (11) on rear frame rail (14) with two screws (10).
20. Tighten self-locking nut (15) to 60-72 lb-in. (7-9 Nm).
0073 00-13