Quantcast REAR SHOCK MOUNT CROSSMEMBER INSTALLATION, MTVT

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
SHOCK MOUNT CROSSMEMBER REPLACEMENT - Continued
0107 00
REAR SHOCK MOUNT CROSSMEMBER INSTALLATION, MTVT
NOTE
Left and right sides of rear shock mount crossmember are installed the same way. Right
side shown.
Steps (1) through (3) require the aid of an assistant.
1.
Position rear shock mount crossmember (46) on frame rails (16) with three bolts (47) and self-locking
nuts (48).
Tighten three self-locking nuts (48) to 210-225 lb-ft (285-305 Nm).
2.
3.
Perform steps (1 and 2) on left side of rear shock mount crossmember (46).
0107 00-13


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.