TM 9-2350-222-10-3
MAINTAIN TRACK (REMOVE END CONNECTORS) - Continued
NOTE
Inner end connectors (Q) are removed the same way
as outer end connectors (M) as follows below.
1. Place 15/16 inch socket (A), T handle (C), and extension
bar (J) on bolt (R).
2. Turn counterclockwise to loosen bolt (R). Loosen bolt
three turns. Remove socket (A).
3. Tap bolt (R), with hammer, to loosen wedge (S).
4.
Remove bolt (R) and
wedge (S) from outer
end connector (M).
TA132895
3-65