TM9-2350-222-10-3
Replace fluid dipstick (G) into reservoir (H).
9.
10. If nitrogen precharge (525 25 psi ) was
indicated, set ELEV/TRAV POWER switch
(A) to ON to recharge hydraulic system.
CAUTION
If gage pressure exceeds 1500
psi, if motor operates continu-
ously, or if motor is very noisy,
set ELEV/TRAV POWER switch
(A) to OFF and notify organi-
zational maintenance.
Il. Watch pressure gage (F) for needle to rise to
approximately 1225-1275 psi.
1.2. Turn turret to right or left and then back to
center. Watch for smooth movement
(page 2-503).
13. Raise and lower gun. Watch for smooth
movement (page 2-502).
14. Set ELEV/TRAV POWER switch (A) to OFF.
15. Set MASTER BATTERY switch to OFF.
3-258 Change 5