TM 9-2350-277-10
BYPASS DEFECTIVE TRANSMISSION CONTROLLER
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
Equipment Condition
Operator
Personnel Required
Driver
BYPASS DEFECTIVE TRANSMISSION CONTROLLER
NOTE
If carrier does not move in any shift lever position, transmission controller may be defective. Do
Steps 1 - 5 below to bypass defective transmission controller allowing you to drive carrier.
1.
Disconnect wiring harness from transmission controller.
2.
Open tow start handle cover.
NOTE
With transmission controller wiring harness disconnected, transmission will shift to 1-4 range
when tow start handle is pulled. Carrier will move if parking brake is not set.
3.
Pull tow start handle momentarily and release to engage transmission. Release parking brake (WP 0020 00), close cover,
and drive carrier to required destination.