TM 9-2350-277-10
BREAK/JOIN T130 TRACK -- Continued
0092 00
CAUTION
Track pin threads are easily damaged. Do not force track pin. Tap track pin lightly with
hammer.
NOTE
If track is difficult to join, use the track fixtures to pull the track together and open the track
adjuster relief valve (WP 0091 00) to relieve any track tension from the track adjuster.
NOTE
As track pin moves through track bushing, the track pin will push the drive pin punch out
ahead of it.
1.
Install two track fixtures across place where track is to be connected. Install track fixture on outside track first. Use
adjustable wrench.
2.
Move ends of track together with crowbar.
CAUTION
Oil or grease will destroy the rubber bushings in track shoes over time. Do not coat track pin
with oil or grease.
3.
Install a nut flush with one end of the pin.
0092 00-6
Change 4