TM9-4120-400-14
EVAPORATOR COIL. - continued
5-21.
Figure 5-17. Evaporator Coil
When handling coils wear gloves to avoid cuts and reduce fin damage on the coil.
5. Lift evaporator coil (6) up and out of unit.
6. Carefully position evaporator coil (6) in unit.
7. Position mist eliminator holder(11) in unit.
8. Secure mist eliminator holder(11) and evaporator coil (6) to housing with four flat head screws (5 and 7).
Secure evaporator coil to housing with two each screws (8), Iockwashers (9), and flat washers (10). The four
holes in the mist eliminator holder match the bottom four holes in the coil.
5-53