TM 9-4120-408-14
4-22. LIGHT EMITTING DIODE (LED) ASSEMBLY MAINTENANCE. (Continued)
NOTE
This procedure applies to LED assembly DS4, drain indicator light. The procedures for LED assemblies
DS1 through DS3 are similar.
Figure 4-16. LED Assembly.
a. Remove.
WARNING
Do not work on equipment with power connected. Electrocution hazard is present. Failure to obey this
warning may result in death or serious personal injury.
(1) Remove screw (Figure 4-16, 1) from TB2-5 and screw (2) from TB2-7.
4-34