TM 9-2320-360-10
2-19. WINCH OPERATION (CONT)
(4) Move CABLE HOLD DOWN lever (4) to ON position.
(5) Push WINCH control (5) to CABLE IN. Reel in main winch cable (3) on winch drum (6).
(6) Secure main winch cable (3) on drum hook (7).
(7) Set ENGINE SPEED CONTROL switch (8) to LOW ENGINE IDLE position.
(8) Lower guard (9) on winch control consoles.
NOTE
Engine may stall it transmission is shifted into gear before PTO
switch is turned off.
(9) Set PTO switch (10) to off position.
(10) Turn off beacon light switch (11).
(12) Install cover (12) on auxiliary winch (13).
2-168 Change 1