TM 9-2320-360-10
WARNING
Ensure that both DRIVER'S SIDE and PASSENGER'S SIDE
WINCH KICKOUT controls are disengaged.
Failure to
disengage KICKOUT controls may result in injury to personnel.
Use care when operating auxiliary winch control lever. Cable
may pay out at high rate of speed causing injury to personnel.
(10) Push down and hold AUXILIARY WINCH control lever (10) to pull auxiliary winch cable (3)
back to auxiliary winch (11).
(11) Hold down AUXILIARY WINCH control lever (10) until main winch cable (4) has reached
disabled vehicle.
CAUTION
There must be at least five wraps of cable left on drum. If not,
move HET Tractor closer to disabled vehicle or shut down
winch. Failure to do so may result in loosened cable and
damaged equipment.
Never release cable hold downs with most of cable out. Failure
to comply may result in cable becoming tangled.
(12) Ensure there are at least five wraps of cable left on drum (12).
(13) Remove pin (6) and clevis pin (8) from auxiliary winch cable (3).
(14) Disconnect auxiliary winch cable (3) from main winch cable (4).
(15) Install clevis pin (8) and pin (6) in auxiliary winch cable (3).
(16) Remove snatch block (1) from disabled vehicle. Remove auxiliary winch cable (3) from
snatch block (1).
(17) Walkout auxiliary winch cable (3) to eliminate uneven wraps on spool with aid of assistant.
2-163