TM 9-2320-360-10
Table 3-1. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WINCH
1.
WINCHES WILL NOT OPERATE.
Step 1.
Check if PTO is engaged.
Step 2.
Check if circuit breakers have been tripped.
Reset circuit breakers if they have been tripped.
Step 3.
Notify unit maintenance if hydraulic fluid level is low.
2.
WINCHES UNUSUALLY NOISY WHEN OPERATING
Check if cable is twisted, tangled, or causing drum to bind.
Let out or take in cable, as necessary, to straighten cable and free
drum. Notify unit maintenance if winch is still noisy when operating.
3-35