TM 9-2320-360-10
Table 3-1. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
T-CASE TEMP GAGE INDICATES OVERHEATING DURING NORMAL OPERATION. (T-CASE
TEMP GAGE READS OVER 300 F (149 C).)
Step 1.
Shift transmission selector into lower gear and continue operation with
engine brake in low position.
Step 2.
Stop and let transfer case cool if gage does not return to normal.
Step 3.
After gage returns to normal, shift to normal range and continue operation.
Notify unit maintenance if overheating persists.
5.
TRANSMISSION, TRANSFER CASE, AXLE, OR PROPELLER SHAFT(S) UNUSUALLY NOISY
WHEN OPERATING.
Notify unit maintenance.
6.
TRANSFER CASE DOES NOT ENGAGE FRONT AXLE.
Step 1.
Check AIR PRESS gage for over 70 psi (483 kPa) on green needle.
Notify unit maintenance if air pressure will not build over 70 psi (483
kPa).
Step 2.
Check if GAUGES/WARN LTS circuit breakers have been tripped.
Reset circuit breaker.
WHEELS, TIRES, AND HUBS
1.
TIRES WORN UNEVENLY OR EXCESSIVELY.
WARNING
Use caution when inflating tires. Over inflation may cause tires to
blow apart causing serious injury to personnel.
NOTE
If CTIS is not working, tires may be inflated manually.
Inflate tires only when they are cool. Inflate to proper pressure for
terrain conditions.
Step 1.
Check for proper tire pressure.
Manually inflate or deflate tires to proper pressure (para 3-7).
3-30
