TM 9-2330-376-14&P
4 - 5 7 . DATA PLATE REPLACEMENT
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
Six drive screws
Industrial goggles
WARNING
Wear eye protection when driving heads off drive screws. Failure to follow this warning
may result in eye Injury or loss of vision.
1.
Use hammer and chisel to remove heads of six drive screws (2).
2.
Use hammer and 1/8 in. punch to drive remainder of drive screws (2) out of holes. Remove data plate (1). Discard
drive screws.
1.
Position data plate (1) and six new drive screws (2).
2.
Use hammer to install drive screws (2) into holes.
TA701002
4-104