TM 9-2330-376-14&P
(Con't).
4.
Install hub adapter plate (1) with three screws (3)
and new Iockwashers (2).
Install new Iockwasher (10) and nut (9) on drive
5.
shaft (8).
Install new gasket (11) and mounting plate (20) on rear axle (17) with eight screws (13) and new Iockwashers
6.
(12).
Tighten swivel nut (18) on connector (19).
7.
Position drive shaft (8) in bracket on chassis and install spacer plate (21) with two screws (22) and new
8.
Iockwashers (23).
Position drive shaft (8) in bracket on rear axle (17) and install spacer plate (14) with two screws (16) and new
9.
Iockwashers (15).
Install new gasket (7) and access cover (4) on hub with three screws (6) and new Iockwashers (5).
10.
TA701005
4-107