TM 1-4920-441-13&P
TOOL CRIB SHOP
CONNECTING COMPRESSED AIR AND WATER
In addition to electrical power, shop is provided with connections for compressed air and water. These
connections are located on the Services Utility Panel (see WP 0002 00, Figure 1).
COMPRESSED AIR
1. Remove protective dust cap (2) from air inlet nipple (3) at services utility panel (1).
2. Obtain a quick disconnect coupling (4) from appropriate storage location.
3. Install the quick disconnect coupling (4) on air inlet nipple (3) located on service utility panel and tighten
securely.
0009 00-1
