TM 11-5820-489-10
TO 31R4-2GRA6-31
NOTE
Local operator's message will be transmitted if push-to-talk is used
while remote operator is talking (watch timing).
Local operator can take control of the
q
radio set from the remote operator by
the following method:
1. If special installation provides for
power control, turn radio power
switch from REMOTE power ON
position to LOCAL power ON position.
2. Turn REMOTE switch to SET 1 and 2.
3. Turn LOCAL switch to SET 1 or SET 2
(whichever is needed).
4. Press push-to-talk switch.
Release switch to listen.
2-35