TM 11-5895-1141-12
i.
Insert the headset, headphone or microphone to be used into the proper HEADSET jack (8) or MIC HIGH LEVEL
connector (9).
NOTE
Syllabic indicator light (6) of channels at which a received signal is present will flash regardless of
the position of the switches.
j.
Set LOUDSPEAKER/HEADSET switch (3) to LOUDSPEAKER for channels to be listened to through the
loudspeaker. Any number of channels may be set with the SPEAKER volume (10) used.
k. Set LOUDSPEAKER/HEADSET switch (3) to HEADSET for channels to be listened to through the headset. Any
number of channels maybe set with the HEADSET volume controls (11) used.
2-5