TM 3-1040-262-13&P
This time will be expressed in manhours (MH) and
TMDE reference code correlates with a code used in the
carried to one decimal place (tenths of hours). The
MAC, Section II, Column 5.
symbol designations for the various maintenance levels
b. Column 2, Maintenance Level The lowest level
are as follows:
of maintenance authorized to use the tool or test
C ................................................Operator or crew
equipment.
0..................................Organization maintenance
c. Column 3, Nomenclature. Name or identification
F ...............................Direct support maintenance
of the tool or test equipment.
e. Column 5, Tools and Equipment Column 5
d. Column 4, National Stock Number. The National
specifies, by code, those common tool sets (not
Stock Number of the tool or TMDE.
individual tools) and special tools, TMDE, and support
equipment required to perform the designated function.
e. Column 5, Tool Part Number.
The
manufacturer's part number.
f. Column 6, Remarks. This column shall, when
D-5.
Explanation of Columns in Remarks Section
applicable, contain a letter code, in alphabetic order,
which shall be keyed to the remarks contained in Section
a. Reference Code. The code recorded in column
6, section II, maintenance function being performed as
D-4.
Explanation of Columns in Tool and Test
indicated in the MAC, section II.
Equipment Requirements. Section III
a. Column 1, Reference Code. The tool and
b. Remarks.
This column lists information
pertinent to the maintenance function being performed
as indicated in the MAC, section II.
D-2
