TM 5-1940-322-10
0010 00
BEB LAUNCH USING CBT (Contd)
BOAT PREPARATION
CAUTION
If boat is equipped with depth sounder, remove depth sounder
prior to launch of boat or damage to equipment may result.
NOTE
If cab is present, ensure that cab is mounted prior to launch.
Operator and crew will help prepare boat for launch.
1.
Remove tie down line (2) from cab (3).
2.
Position cab (3) over forward compartment using lifting handles (4).
3.
Align and close cab fasteners (5).
4.
Connect windshield wiper electrical plug (6) to receptacle on control console (1).
WARNING
Prior to launch the hull drain plug must be installed. Failure
to comply may result in injury or death to personnel and
damage to equipment.
5. Ensure drain plug (8) is installed in hull drain hole (7).
0010 00-2
