TM 5-1940-322-10
0041 00
MECHANICAL TROUBLESHOOTING (Contd)
Engine Troubleshooting.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CAUTION
Never use starting fluid (ether) to assist starting engine.
Failure to comply will result in damage to engine.
1.
ENGINE WILL NOT CRANK
Step 1. Check position of master switch.
Set master switch to ON position.
Step 2. Check Starting Batteries gauge for 24 volts.
a. If gauge reads less than 24 volts, depress emergency link button on
auxiliary switch panel to link auxiliary batteries in parallel.
b. Notify Field maintenance.
Step 3. Check position of engine emergency stop control cables.
a. Push control cable in.
b. Notify Field maintenance.
END OF TESTING
2.
ENGINE CRANKS BUT DOES NOT START
Step 1. Check for empty fuel tank.
Fill fuel tank.
Step 2. Check position of engine emergency stop control cables.
a. Push control cable in.
b. Notify Field maintenance.
END OF TESTING
3.
ENGINE SHUTS DOWN DURING OPERATION
Step 1. Check for empty fuel tank.
Fill fuel tank.
Step 2. Fuel filter blocked.
Notify Field maintenance.
END OF TESTING
