TM 5-1940-322-10
MAINTENANCE INSTRUCTIONS/PMCS
BRIDGE ERECTION BOAT (BEB)
MK II-S
NSN 1940-01-526-0770
P/N 12492423
LUBRICATION INSTRUCTIONS
GENERAL
The following lubrication instructions are for operator maintenance, and provide the
lubrication requirements necessary to support the Bridge Erection Boat (BEB).
Refer to Table 1. Use of Lubricants and Table 2. Lubrication Intervals and Locations
in this work package for fluid capacities, lubricant requirements, and lubrication
points for the BEB.
SERVICE INTERVALS
1. Operator's service intervals are for normal operation of the BEB in moderate
temperature, humidity, and atmospheric conditions. The lubrication for the
BEB is to be performed at whichever interval occurs first.
2. Check engine oil level in both engines weekly and after each use. If necessary,
add engine oil. Refer to WP 0049 00.
3. Check transmission hydraulic reservoir weekly and after each use. If oil level is
low, add oil. Refer to WP 0049 00.
4. If operating in extreme heat or cold, notify field maintenance to change oils and
lubricants as required.
WARNING
Accidental or intentional introduction of liquid
contaminants into the environment is in violation of
state, federal and military regulation. Refer to Army
POL, WP 0001 00 for information concerning storage,
use, and disposal of these liquids. Failure to comply may
result in damage to environment and health of
personnel.
0047 00-1
