TM 55-1925-282-14&P
0023 00
2
3
4
1
Figure 1. Charcoal Filter Assembly
ASSEMBLY
1. Place the new carbon briquette (filter element) (figure 1, item 4) into the filter bowl (figure 1, item 1).
2. Lubricate the new O-ring (figure 1, item 3) with silicone lubricant, and install it on the filter bowl (figure 1,
item 1).
3. Position the filter bowl (figure 1, item 1) in contact with the lid (figure 1, item 2), and tighten until snug.
4. Remove the lockouts and tagouts (FM 55-502).
5. Perform ROWPU fresh water flush (WP 0005 00).
6. Inspect the charcoal filter for leaks.
7. Return the equipment to the desired readiness condition.
END OF WORK PACKAGE
0023 00-2
