TM 55-1925-282-14&P
0024 00
1
6
5
11
10
4
2
7
8
3
9
5
6
10
11
Figure 5. Product Water and Brine Flow Meters (Rear View)
INSTALLATION
1. Gently install the float (figure 5, item 4) on the guide rod (figure 5, item 3).
2. Gently install the guide rod (figure 5, item 3) and float (figure 5, item 4) in the PRODUCT flow meter glass
tube (figure 5, item 2).
3. Install the bumpers (figure 5, item 5) and tube stops (figure 5, item 6) on the glass tube PRODUCT flow meter
glass tube (figure 5, item 2).
4. Position the assembled PRODUCT flow meter in the applicable flow control panel.
5. Install the top access screw (figure 5, item 1).
6. Close the flow control panel, and tighten the two captive screws (figure 4, item 7).
7. Install the stainless steel piping (figure 4, item 3) and outlet hose (figure 4, item 5) to their respective fittings
(figure 4, item 4 and 6).
8. Perform the Follow-On Service procedure at the end of this work package.
0024 00-8
