INSTALLATION - TM-55-1925-284-14-P0088

TM 55-1925-284-14&P

0014 00

3. Remove any remaining chlorine tablets (figure 2, item 4) from the chlorinator feed tube (figure 2, item 1).

4. Rinse the feed tube (figure 2, item 1) with water and allow it to air dry before proceeding.

INSTALLATION

1. Place the chlorinator feed tube (figure 2, item 1) into the chlorinator body (figure 2, item 2).

2. Lock the chlorinator feed tube (figure 2, item 1) into the positioning ribs (figure 2, item 5) by twisting the

chlorinator feed tube slightly.

WARNING

Chlorine tablets can be hazardous. Do not inhale vapors or tablet dust. Protect

eyes and skin from contact with tablets. Handle tablets with rubber gloves and a

safety shield or goggles. Wash thoroughly with water after contact. Keep away

from oil, rags, paper, and other combustible materials. Store in a cool dry area. In

case of fire, use water. Failure to comply can lead to serious injury or death.

3. Insert the chlorine tablets (figure 2, item 4) one at a time into the chlorinator feed tube (figure 2, item 1)

ensuring that the chlorine tablets lie flat on top of one another.

4. Install the chlorinator feed tube cover (figure 2, item 3) on the chlorinator feed tube (figure 2, item 1).

5. Perform the residual chlorine test in this work package and adjust the chlorinator (WP 0013 00) as required.

REPLENISH CHLORINATOR TABLETS

1. Remove the chlorinator feed tube cover (figure 2, item 3) from the chlorinator feed tube (figure 2, item 1).