TM 55-1925-286-13&P
0024 00
2. If the oil pickup tube's (figure 1, item 6) inlet screen (figure 1, item 8) is clogged, a wire brush may be utilized
to clean the screen. If cleaning is unsuccessful, replace the oil pump pickup tube.
INSTALLATION
1. Install the oil pickup tube (figure 1, item 6) and new gasket (figure 1, item 7) on the bearing carrier assembly
(figure 1, item 2) and secure it with the two bolts (figure 1, item 4) and two new lockwashers (figure 1, item 5).
2. Position the bearing carrier assembly (figure 1, item 2) and new gasket (figure 1, item 3) onto the compressor
and secure it with the eight bolts (figure 1, item 1).
3. Perform Replace Pilot Valve Installation (WP 0019 00).
4. Perform Change Oil and Filter Assembly (WP 0018 00).
REPLACE COMPRESSOR VALVES
REMOVAL
1. Remove the four bolts (figure 2, item 1) that secure the suction valve's (figure 2, item 2) valve cover plate
(figure 2, item 3). Remove the valve cover plate and gasket (figure 2, item 4). Set aside the valve cover plate
and discard the gasket.
21
20
22
6
30
7
29
24
13
8
31
18
17
14
10
23
15
25
9
19
11
26
32
33
1
16
12
3
4
28
27
2
5
Figure 2. Compressor Valve Replacement
0024 00-3
