TM 55-1925-286-13&P
0024 00
3
2
5
4
7
6
8
1
Figure 1. Oil Pump/Oil Pickup Tube Replacement
4. Remove the two bolts (figure 1, item 4) and two lockwashers (figure 1, item 5) that secure the oil pickup tube
(figure 1, item 6) to the bearing carrier assembly (figure 1, item 2). Discard the lockwashers.
5. Remove the oil pickup tube (figure 1, item 6) and gasket (figure 1, item 7) from the bearing carrier assembly
(figure 1, item 2). Discard the gasket.
CLEANING AND INSPECTION
WARNING
Do not allow compressor oil or cleaning solvents to come in contact with unpro-
tected skin or eyes. Prolonged skin contact can cause illness or injury. Eye con-
tact can cause serious injury. Always wear chemical protective gloves and goggles
when handling compressor oil and cleaning solvents. Failure to follow these pre-
cautions can result in illness or serious injury.
Wire brushing operations produce high velocity flying debris which can become
lodged in the skin or in the eyes. All personnel working in the area must wear
protective eyewear, gloves, and long sleeves when performing wire brushing op-
erations. Failure to comply can result in death or serious injury to personnel.
1. Thoroughly clean all metal parts in cleaning solvent. Allow parts to air dry.
0024 00-2
