TM 55-4920-390-13&P
SECTION VI
TROUBLESHOOTING
6-1. GENERAL. This section contains instructions and procedures for troubleshooting the Strobex Blade Tracker, Model
placement (Fig. 8-1), during troubleshooting.
6-2. TROUBLESHOOTING CHECK CHART .
The trouble analysis check chart, Table 6-1, is a
chart which includes the
most common faults that may be encountered with probable causes and suggested action required for correction.
NOTE
Failure of the Strobex to operate can usually be traced to simple causes. Always check fuses,
pilot lights, connector continuity, and be sure the DC to which the Strobex is connected is, indeed,
"hot". Perform all tests systematically .
WARNING
1) High voltages are present.
2) Flash tube is subject to explosion - wear protective glasses.
3) The flashing light emits dangerous ultra violet light. DO NOT look directly at source when
operating.
6-1