TM 9-1550-416-14&P
(6) Install engine. (See fig. 3-5.) Attach en-
CAUTION
gine to mounting plate installed in the nose of the
The servos and the battery, as well as the
fuselage using four self tapping screws. Tighten
receiver are shipped pre-mounted to foam
all screws "wrist tight" (approximately 20-25 in-
lbs). Ensure all screws on engine are tight prior to
mounting plugs. These mounting plugs are
installation). Do not install muffler at this time.
to be used for installing these components.
Do not remove them from these mounting
NOTE
plugs. They protect the components from
Before mounting engine, fill mounting screw holes
with epoxy (item 2, app E).
damage during flight.
Figure 3-5. Engine installation.
3-6
Change 1
