TM 9-2320-209-10-1
FRAME 2
WARNING
Whenever you leave the operator's area lock the
feed and drive control levers in brake position.
This will prevent movement of the boring machine
and possible injury to personnel or damage to
equipment. Refer to frame (8) for locking procedures.
To unlock feed and drive control levers (1 and 2):
1.
(a) Pull and hold feed and drive control levers (1 and 2) toward operator.
(b) Lift locking latch (3) by hand and turn it away from operator.
(c) Let go of levers (1 and 2).
GO TO FRAME 3
4-316