TM 9-2320-209-10-1
FRAME 7
1.
To lower derrick:
(a) Step on clutch pedal (1). Place FRONT TRANSMISSION gearshift lever
(2) in R position. Let clutch pedal (1) up.
(b) Place power leveler shifting handle (3) in down position and keep feed
control lever (4) in NEUTRAL position.
(c) Place drive control lever (5) in forward position to lower derrick (6) into
cradle (7) on a protector (8).
CAUTION
Before locking latch (9) against feed and drive control
levers (4) and (5), let machine run with levers in neu-
tral position. This will let heat escape from brake
assemblies in clutch case.
(d) Place power leveler shifting handle (3) in NEUTRAL position.
2.
To lock feed (4) and drive (5) control levers:
(a) Pull and hold feed and drive control levers (4) and (5) toward operator.
(b) Turn locking latch (9) to locked position.
(c) Let go of feed and drive control levers (4) and (5).
4-321
