TM 9-2320-211-10-1
b. Fuel Burning Personnel Heater Kit.
HI-LO switch. Controls rate of
maximum heated air to cab. Is
1.
I
fuel burning and speed of blower
placed half way out to send heated
in personnel heater.
air to both windshield and cab.
Red indicator light. Is lit when
AIR control knob. Is pulled all
2.
5.
the personnel heater is running.
the way out to get maximum air
flow . Is pushed in to slow or
START-OFF-RUN switch. Is set
3.
shut off air flow.
to START position to start per-
sonnel heater. Set to RUN posi-
Emergency switch (on some trucks) .
6.
tion to run heater and to OFF to
Is used for emergency conditions,
stop heater.
only. Switch is pushed down to
turn off fuel burning heaters fast.
DEFROSTER control knob. When
4.
Switch is protected by a metal
pulled all the way out, sends maxi-
guard to stop accidental turn off.
mum heater air to windshield.
When pushed all the way in, sends
TA 053821