TM 9-2320-211-10-1
Turn BATTERY switch (1) to ON position.
1.
2.
Pull hand THROTTLE (2) out half way.
3.
Press engine START button (3) to crank engine.
4.
While engine is being cranked, do the following:
(a) Press accelerator pedal (4) down two thirds of the way.
CAUTION
Do not operate intake manifold air heater unless engine is
running at low speed or being cranked.
(b) Turn INTAKE MANIFOLD AIR HEATER switch (5) to ON position,
5.
If engine does not start in 30 seconds , do the following:
(a)
Turn INTAKE MANIFOLD AIR HEATER switch (5) to OFF position.
(b)
Let accelerator pedal (4) up,
(c)
Let START button (3) up.
6.
Wait two minutes and do steps 3 through 5 again.
NOTE
If engine misses or does not run smoothly after starting,
turn INTAKE MANIFOLD AIR HEATER switch (5) to ON
position , for 30 seconds, then to OFF position. Wait a
few seconds and do it again until engine runs smoothly.
4-44
