TM 9-2320-211-10-1
d. Placing and Keeping Truck in Motion.
I
FRAME 1
Check to make sure that all equipment and tools are made fast for travel.
1.
Turn hand THROTTLE ( 1) left or right a little to unlock it and push it all the
2,
way in.
Set light switch (2) for lighting required, Refer to table 4-1 for switch
3.
positions.
4.
Step on clutch pedal (3) and press it all the way down.
Place FRONT TRANSMISSION gearshift lever (4) in neutral (N) position.
5.
Place TRANSFER CASE lever (5) in LOW or HIGH position, depending - on load.
6.
LOW position is used for heavy loads and HIGH for light loads.
NOTE
Location of TRANSFER CASE lever is different on earlier
trucks. Refer to driver's compartment controls and indi-
GO TO FRAME 2