TM 9-2320-211-10-1
I
FRAME 2
Step on and press clutch pedal ( 1) all the way down.
1.
2.
Make sure that FRONT TRANSMISSION gearshift lever (2) is in N position.
Place front WINCH CONTROL lever (3) in H (high) position.
3.
4.
Set handbrake lever (4) to down (brake off) position.
WARNING
Stand at least 5 feet from front winch, while guiding cable
on drum, to stop hands and clothing from being snagged and
pulled onto the drum.
NOTE
Make sure that first layer of winch cable goes onto drum in
order and that each additional layer starts back across drum.
If necessary, use wooden block to push or hammer cable
closely wrapped.
Let clutch pedal (1) come up slowly. The front winch will pull truck forward
5.
and wind winch cable onto drum.
6.
Step on service foot brake (5) and press down lightly to make sure of a tight,
neat wind.
GO TO FRAME 3
4-82
