TM 9-2320-211-10-1
FRAME 5
When winch cable is fully wound on drum, step on clutch pedal ( 1) and press
1.
it all the way down.
2.
Place front WINCH CONTROL lever (2) in upper N (neutral) position.
Set handbrake (3) to on position.
3.
Push front winch drum clutch lever (4) as far as it will go toward the drum to
4.
DISENGAGE position.
Turn front winch drum clutch lever latch (5) down to locked position.
5.
To stop engine after letting it run at idle speed for 5 minutes :
6.
(a) Turn all switches in driver's compartment to OFF positions.
(b) Pull ENG. STOP control (6) out to cut off flow of fuel. Leave it in out
position.
TA
053882
4-85
