TM 9-2320-211-10-1
FRAME 3
1
Move front winch drum clutch lever (1) as far as it will go toward winch to
1.
take drum out of gear.
2.
Pull front winch drum lock knob (2) out, turn it 90, and set in deep slot.
Turn drum left or right a little until plunger slips into a hole on drum
flange, locking drum.
If winch has a level wind device:
3.
(a) Pull front winch cable tension control lever latch (3) out and hold it out.
Move front winch cable tension control lever (4) toward left side of
truck (off position ) . Set latch (3) in deep slot to lock lever (4) in
off position.
(b) Pull front winch level wind lock knob (5) out, turn it 90, and set it in
deep slot. Move trolley (6) so that lock plunger slips into hole in
trolley (6) , locking it.
GO TO FRAME 4
TA
053885
4-88