TM 9-2320-211-10-1
I
FRAME 10
Make sure that:
1.
(a) Locking plunger has pulled locking plunger operating lever (1) to its rear
position.
(b) Locking plunger operating lever safety latch (2) has dropped down to
locking position.
2.
Raise semitrailer landing gear (3) .
Refer to instructions in operating manual
for semitrailer.
Using adjustable wrench, turn two capscrews ( 4) left to loosen them.
3.
Slide wedges (5) all the way in for highway travel or all the way out for off-
4.
highway travel.
Using adjustable wrench, turn two capscrews (4) right to tighten them.
5.
GO TO FRAME 11
TA
053926
4-128
