TM 9-2320-211-10-1
Riggin g the Tailgate - Rocker Type Operation,
c.
FRAME 1
Star ing from regular dump rigging:
1.
(a)
Take tailgate chains (1) from upper holes and slots (2) near tailgate (3)
and from retainer hooks (4) on both right and left sides.
(b)
Unhook harness hooks (5) from wing gates (6) .
(c)
Swing wing gates (6) to rear of truck.
(d)
Pull retainer pins (7) out of holes (8) .
(e)
Pull tailgate (3) down so that hinge pins (9) fall into grooves ( 10) on wing
gates (6) .
(f)
Place retainer pins (7) back in holes (8).
Place end of chains (1) in holes and slots ( 2). Take up slack in chains (1)
(g)
