TM 9-2320-211-10-1
FRAME 2
Pull cable hook (1) up through right bumperette (2) across and down through left
1.
bumperette (3).
Put cable hook (1) around chain between bumperettes (2 and 3).
2.
Move CLUTCH CONTROL lever (4) to ENGAGE position to take up any cable slack.
3.
4.
When cable is snug, move CLUTCH CONTROL lever (4) to DISENGAGE position.
Place WINCH SHIFT control lever (5) in NEUTRAL position.
5.
Place cable tensioner valve (6) in OFF position.
6.
Pull level wind lock knob (7), turn it 90 , and let it go into deep slot to lock level
7.
wind trolley (8).
Push pin (9) through holes in WINCH SHIFT control lever (5) and bracket (10) to
8.
lock lever (5).
9.
Move CLUTCH CONTROL lever (4) to ENGAGE position.
GO TO FRAME 3
TA 053971
4-176
