TM 9-2320-211-10-1
FRAME 4
WARNING
Do not attempt to ford your truck in depths greater than
72-inches. While fording, keep your speed down to 3 or
4 miles per hour.
After fording, do not rely on brakes until they dry out.
Keep putting them on and letting them go until truck
stops without brakes grabbing.
Failure to see these warnings could result in injury to
personnel and damage to equipment.
Make sure your engine is running correctly and start fording. Refer to
1.
After leaving the water, push FORDING valve control cable handle (1) in.
2.
3.
GO TO FRAME 5
4-226