TM 9-2320-211-10
NOTE
When pulling a heavy load, attach a single sheave snatch block (2) to the load and
attach hook (1) from cable (3) to lifting shackle on front bumper.
(2) Pull drum clutch lever (5) away from winch drum to engage drum jaw clutch.
(3) Start and run the engine with gearshift lever (6) in N (neutral) position.
(4) Depress clutch pedal (10) and disengage hinged lock on winch control lever (7).
(5) Place winch control lever (7) in L (low) position for heavy loads or H (high) position
for light loads. When in doubt, use low.
CAUTION
Always use hand throttle in the "locked out" position when operating winch, to
maintain a smooth, steady speed. Operating engine at an excessive or erratic speed
can cause overloading of winch and may result in damage or failure of parts.
TA 067040
2-66