TM 9-2320-211-10
g. Securing Crane for Travel.
(1) Without fifth wheel trailer.
(a) Center shipper (4) and boom
assembly (3) fully retracted and horizontal
over rear of truck.
(b) Insert pivot post lockpin (13) in
pivot post stop plate (12).
(c) Attach lifting sling (9) to cable
hook (10) and to outrigger frame tube (11).
(d) Raise cable hook (10) to remove
all slack in lifting sling (9).
(e) Unlock and push hand throttle
control (14) in. Place floodlight control
switch (15) in OFF position, if floodlights
have been used.
(f) Depress clutch pedal (21), move
p o w e r takeoff lever (19) down to
DISENGAGE position, move transfer shift
lever (18) to HIGH or LOW position, place
gearshift lever (16) in N (neutral) position,
and release clutch pedal.
(g) Apply handbrake (17) and depress
brake pedal (20) to release electric brake
lock.
(h) Stow and secure outriggers, boom jacks, tie bar, boom base plates, and boom pushout
rod, as necessary.
TA 155226
Change 1