TM
9-2320-211-10
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Be sure you have completed all applicable operating checks before using
this table.
NOTE
See organizational
maintenance personnel for corrective actions for malfunctions
not listed in this table.
ENGINE
1. When starter impressed, engine fails tocrank, or cranks slowly.
Step 1. See if ignition switch (gasoline) is on or battery switch (diesel and multifuel)
is on.
Turn on.
Step 2. See if transmission lever is in N (neutral) position.
Place in N position.
Step 3. See if battery cables are loose, broken, or corroded and that battery is filled
Step 4. Check log book for date of last oil change to determine probable oil weight in
engine.
If necessary, drain and refill with right weight of oil (see LO 9-2320-211-12).
Step 5. Other causes.
Notify organizational maintenance.
2. Engine cranks but does not start.
Step l. See if fuel gage indicator is on E (empty).
If empty, fill fuel tank.
NOTE
Do not fill fuel tank completely before checking visually for leaks in fuel system.
If leaks are found, notify organizational maintenance.
TA 155232
Change 1