TM 9-2320-269-10
DERRICK HYDRAULIC CONTROLS-OPERATOR'S CONSOLE - CONTINUED
Key
Control or Indicator
Function/Use
1
POLE PULLER AND TAMPER
This control is for the tool outlets located on the derrick leg and at
CONTROL LEVER
the baskets. It has three positions and will stay in the position you put
it in, until you move it out.
2
POLE GUIDE CONTROL
Raises and lowers the pole guide arms so you can position them, or
LEVER
get them out of the way when you're using the fiberglass extension.
3
POLE GUIDE ARMS CONTROL
Opens and closes the pole guide arms. The control is spring loaded
LEVER
to the neutral position. When you release it, the arms will stop
wherever they are.
4
AUGER LOCK CONTROL
Controls the opening of the auger lock assembly. Pushing the control
LEVER
forward will open the lock and release the auger. If the control is let
go, it will return to the neutral position. Unless you push this control
forward, the auger will automatically lock when it is raised.
TA 222535
2-26
