TM 9-2320-269-10
DERRICK HYDRAULIC CONTROLS-OPERATOR'S CONSOLE - CONTINUED
Key
Control or Indicator
Function/Use
5
TURRET WINCH CONTROL
Controls the payout (unwinding) and takeup (winding) of the turret
LEVER
winch cable.
6
AUGER CONTROL LEVER
This lever controls the digging operation, and the winding and
unwinding of the auger from the stowed position to the operating
position. It's spring loaded to the neutral position.
7
BASKET/CONSOLE CONTROL
Raising this lever allows you to control the derrick leg operation from
SELECTOR LEVER
the baskets. To operate the derrick from the control console, the lever
must be in the down position.
8
LEFT REAR SPOTLIGHT
Turns the spotlight on when it is out in the same position as the switch
SWITCH
on the spotlight bracket. To turn the light off, place it in the opposite
position of the switch on the spotlight bracket.
TA 222536
2-27