TM 9-2320-269-10
COOLING SYSTEM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
SERVICING - CONTINUED
2 Surge tank (1)
Locking cap (2)
1. Unscrew and take off. Set aside.
CAUTION
If the engine Is overheated and must be kept running, keep it running before adding
coolant. Otherwise, the block or cylinder head could crack.
2. Fill surge tank (1) with coolant until it reaches
above the sight glass window (3).
Approximately 1 Inch (2.54 cm) below filler
neck (4).
3. Screw locking cap (2) back on surge tank.
NOTE
TASK ENDS HERE
TA 222698
3-38