TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
a. Prepare Vise for Operation.
(1)
Loosen lockscrew (1).
(2)
Remove quick pin (2) and pin (3).
(3)
Pull vise (4) out fully, and aline hole.
(4)
Install pin (3) and quick pin (2).
b. Return Vise to Stowed Position.
(1) Remove quick pin (2) and pin (3).
(2) Push vise (4) into stowed position.
(3) Aline hole and install pin (3) and quick pin (2).
(4) Tighten lockscrew (1).
