TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(4) Pull LIFT CYLINDER control lever (6) to lower crosstube (7) to
approximately 3 ft (1 m) above ground.
NOTE
For disabled M984E1 position wrecker so crosstube (7)
is approximately 4 inches (100 mm) from disabled
vehicle's crosstube.
(5) Position wrecker so that crosstube (7) is approximately 1 ft (30 cm)
from tow eyes of disabled vehicle and centered on disabled vehicle.
WARNING
When end caps are removed from crosstube, adapters
may slide off causing personal injury.
(6) Remove two quick pins (8) and pins (9) from end caps (10).
(7) Remove end caps (10) from crosstube (7).
2-167
